how to use a climbing tree stand safely

How to Use a Climbing Tree Stand

Many hunters decide to use climbing tree stands. Regardless of whether or not you use a bow or a gun, using a climbing tree stand gives you plenty of advantages while hunting. These stands place you above your game, allowing you access to other angles for aiming that you might not have otherwise had access to in the first place. At the same time, these stands are easy to use and setup. They are even easy to relocate to other trees. Here is a closer look at climbing tree stands and how to use them to better your chances at gaining a kill while hunting.

How Do You Pick the Right Climbing Tree Stand?

A few things need to be considered before you launch headlong into using a climbing tree stand. First and foremost, you need to look at what goes into purchasing one of these stands. In order to purchase the right stand, you should consider how your typical hunting spot looks. Understanding what this area looks like and the kind of access you have to it is key. For example, you might consider a lighter stand if it needs to be carried over rough terrain or deep into the woods or up a mountain.

How Do You Choose the Right Tree for the Stand?

Along with knowing your hunting area, you should also become rather familiar with the trees available to you in the area. The proper tree for your stand should be, first of all, similar in width the entire way up the trunk. After all, it would be easier to latch a stand onto a uniformly shaped tree. Such a tree also makes for safer climbing up and down the stand. You will want a tree that has some substance to it. Therefore, older trees are your friend in this case.

A solid tree for a tree stand also does not have many low-lying branches sticking out. For the sake of safety, you need to make certain your tree does not cause you any obstacles from climbing in or out of the stand. Certainly, you could remove these obstacles, if needed. This suggestion flies in the face of leaving no trace in the woods, though. In the long run, to avoid bothering nature at its finest, a tree stand should be an easy up and easy down kind of deal with installation. Modifying a tree might not be the right idea.

How Do You Find the Right Angle for a Climbing Tree Stand?

Finding the right way to make this climbing tree stand level for you can be a task and a half. In an ideal world, all you would have to do is locate the right tree that is already level for you. This situation is not always the case, though. Hence, you need to find the right angle to sit your climbing tree stand. Using a slightly upwards angle means the platform itself usually sits level. However, part of this relies on how high up you place your stand. The higher the stand, the steeper the angle needs to be.

Part of the angle depends on the shape of your tree, too. For trees that happen to be uniform in size throughout the height of the trunk, you will not have nearly as many problems finding the right angle. Most of the time, going with that slightly upward facing angle mentioned earlier on will do the trick. On the other hand, though, you might have to deal with not-so-uniform shapes in trees. Honestly, this situation is the truth most of the time, so you need to be ready to face the music with the situation.

Tree trunks that become narrower at the top than at the bottom can certainly be used for climbing tree stands. However, you might have to raise that upward angle a great deal more. The goal here is to make your footing platform as level as possible. Upward angles are the only way to achieve that on this type of tree. You might find the angle a bit steep at first, but it acts as the safest way to install a climbing tree stand on this type of tapering trunk.

You can also use trees whose trunks become narrower at the bottom than at the top. The angle here might not be nearly as steep. In some cases, the angle might have to point downward slightly. However, you need to be careful in these situations. Facing the platform downward too far will lead to a dangerous situation for you. It means the climbing tree stand could give way out from under your weight. Hence, you need to be certain the stand is rather tightly secured at this angle to be as safe as possible.

How Do You Secure a Climbing Tree Stand?

securing treestand
Img Source

Once you picked out the tree and decided on an angle to place the stand at, then you can start attaching the stand to the tree. There are a few safety measures to consider before actually climbing the tree once the stand is in place, though. To begin with, you need to be sure the top and bottom sections are secure. For functionality purposes, these two parts usually come attached or should be attached to one another. Be sure all straps and hinges fit tightly in place and do not show signs of giving out.

The next thing to consider is the feet to the stand. Usually, these feet come attached to the bottom of the platform. You need to be sure they do not separate from one another during your climb up the stand. It is important to note you will need to pull up these feet with your legs once you sit in the stand. Therefore, you need to make sure these feet sit at an angle that you can easily access with your lower extremities. Having these feet firmly in place also lessens the chances your legs will lose grip on them while pulling them upward once you are on the stand. After all, you do not want to lose the only way out of the tree. For safety purposes, a connection rope should be in place to keep the feet attached to the rest of the stand.

Once you find yourself in your stand up in a tree, the first thing you need to consider is how to sit in the tree safely. Sitting on the standalone does not make you safe. There is a chance the stand could fail, so you want to be as secure and safe as possible from danger.


In Summary...

There are plenty of things to consider when looking at how to use a climbing tree stand. Securing yourself and the stand at a safe angle should be your first concern. Additionally, the size and girth of the tree play a crucial role in determining how safely you can sit in the tree. You should be prepared to make changes and adjustments along the way because, truth be told, it takes these adjustments to make you safe and comfortable in the tree. Instead of fearing the tree stand, you need to embrace it as much as possible and take measures to be secure in case of failures.

LEAVE A REPLY

Please enter your comment!
Please enter your name here